Skip to content

Go Back To Shop All

Loading...

Kia Stinger Dump pipe back

Dynomotive built Kia Stinger GT – Dump Pipe Back Exhaust BIMODAL

NOTE: Use the on/off control box with your Bi-Modal exhaust when a Unichip has not been installed.

 

$3,690.00

SKU: DM-STGR-DBE-BM Categories: ,

Available on back-order

Loading...

Kia Stinger Dump pipe back  –  DM-STGR-DBE-BM Dynomotive Built Kia Stinger Dump pipe back exhaust with no bimodal.

This Hi-flowing exhaust bolts up to the original dump pipe flange.  It is complete all the way to the rear mufflers.

These are an Australian design and manufactured locally.

  • Featuring bent stainless steel mandrel which has been tig welded to emits zero drone into the cabin.
  • With a combination of countless hours of R & D, unlike other manufactures we own our Kia Stinger GT.  It has been tested with nearly every exhaust combination on the market.
  • We found that there was not one exhaust on the market that offered the flow required while keeping the exhaust note.

So, we made our own.  It is a similar combination of this is exhaust used in our record breaking 700hp at the wheels kia stinger.

What is in the box?

  • From the dump pipes 3” Mandrel bent Stainless steel.
  • The Centre 3” Resonators
  • Tapered 2.5” Rear mufflers designed to fit the factory Kia Tips.  (There is no noticeable decrease in power using 2.5” rear mufflers over 3”, however there is a significant increase in drone with 3” rear mufflers)

“J” pipes can only address the point of resonance at one rpm.  Therefore the length of the “J” pipe determines the point of control.  For example the V6 Kia engine loudest point of resonance is 2800rpm.  In order to address that with a “J” pipe it requires a length of 1862mm (yes we have tried it).  With this in mind we removed the “J” Pipe

We spent 18 months developing our exhaust system that has the least amount of comprises. Our system has enough flow for around 850hp and controls the noise over the widest range of anything else in the market.

Don’t forget to Add a Bimodal ECU on/off control at checkout for use without the installation of a Unichip.

Please Confirm in check out “notes” what Tips you have:

2017 – Dec 2020

December 2020 – Onwards

 

Weight 8 kg
Dimensions 79.9 × 44.9 × 39.9 cm
Car Year

, , , ,

Engine

Make

Model

Unichip

Bimodal Control Uni-X ECU, BiModal ECU on / off control

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
    Your Cart
    Your cart is emptyReturn to Shop
      Calculate Shipping
      Apply Coupon
      Unavailable Coupons
      aus4x4 Get 10% off
      dmfte Get $390.00 off
      kia10 Get 10% off 10% off selected KIA Stinger Products Valid until
      lc300 Get 10% off
      paulbf Get 10% off
      winter2022 Get 20% off Look smart and stay warm in a Dynomotive Apparell. Variable Sizes.
      xmas23 Get 10% off